SOLID CORE DOOR 520P

Veneer and High Pressure Decorative Laminate
Particleboard Core, Bonded and Abrasive Planed
Also Available 20 Minute Rated
WDMA: PC-7       PC-5        AWI: PC-7   PC-5
WDMA: PC-HPDL-3/5        AWI: PC-HPDL-3/5
 
Top & Bottom Horizontal Edge: 1-1/8" minimum solid wood structural composite lumber or LVL.

Vertical Edge: 1-1/2" minimum  hardwood; solid, laminated or veneered. Backer or inner ply may be structural composite lumber or LVL.

Core: Particleboard, ANSI A208, 1, grade LD-1 or LD-2.

Core/Edge Interface: Stiles and rails high frequency bonded to core and core assembly abrasive planed prior to application of crossband and veneer.

Back Veneer or HDF
Crossband: Edge glued or one piece crossband .

Faces: Selected hardwoods minimum 1/50", high pressure decorative laminate, medium density overlay or hardboard. High pressure laminate 0.050" direct to core, 0.050" with crossband or  0.125".

Warranty: Lifetime for interior use,* one year exterior, fully Type I wood or MDO  only.

COMMERCIAL SOLID CORE DOOR 420P  
Selected veneer and Hardboard,
Particle Core, Bonded and abrasive planed
Also Available 20 Minute Rated, See Pg. 6
WDMA: PC-7          AWI: PC-72045minutechart.pdf

General Description:
Construction same as 520P as shown above, however, face options are limited to good grade red oak, rotary cut birch or hardboard faces.

Warranty: Five year warranty for interior use / one year exterior, fully Type I, wood faces only.